Become a feeder
Share live aircraft from your own antenna. Free while your station is sending. Quiet for 24 hours — paused until data comes back.
After approval we email a short Pi command. It reads your dump1090 or readsb file and sends it to Sky Hub Cloud. No broker password on this page.
How it works
1. What you need
A Raspberry Pi (or another Linux computer) with a 1090 MHz antenna and receiver, already running readsb, dump1090-fa (PiAware) or dump1090-mutability. Already feeding Flightradar24, FlightAware or others? Keep them. Sky Hub Cloud only reads the aircraft list. It does not touch your receiver or your other feeds.
2. Request access
Fill in the form below. We review every station by hand.
3. One command
After approval we email your portal login and one line to paste on your Pi. It finds your aircraft data, installs a small service that starts by itself after a reboot, sends a test and tells you in plain words if it works.
4. Check it
The command ends with "OK - your station is sending 37 aircraft". Check any time with:
sudo systemctl status skyhub-feeder
5. The 24-hour rule
Full access stays on while your station is sending. Quiet for 24 hours - paused until data comes back. Nothing is deleted.
6. Remove it
One line removes everything:
curl -fsSL https://skyhubcloud.com/static/feeder_uninstall.sh | sudo bash
What we receive: only the aircraft your antenna hears (position, altitude, callsign, speed, heading). No passwords, nothing from your home network.